Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity

Rusul Dawood Salim; Jassim Mahdi AL-Asadi; Aqeel Yousif Hashim

doi:doi:10.11648/j.sjee.20150302.11

| Peer-Reviewed

Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity

Rusul Dawood Salim, Jassim Mahdi AL-Asadi, Aqeel Yousif Hashim

Published in Science Journal of Energy Engineering (Volume 3, Issue 2)

Received: 24 May 2015 Accepted: 9 June 2015 Published: 25 June 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this research, a comparison is made among three units of solar water distillation (M1, M2 and M3) , where M1 is a passive solar still , M2 is a passive solar still coupled with flat plate collector and M3 is similar to M2 but it was provided with copper tube inside the still to realize the latent heat. Only the daily productivity factor was used to make a comparison among these units. The results shows that the productivity of M2 is more than it for M1 by 42%, While the productivity of M3 is more than it of M1 by 52%.

Published in	Science Journal of Energy Engineering (Volume 3, Issue 2)
DOI	10.11648/j.sjee.20150302.11
Page(s)	6-10
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Solar Collector, Solar Energy, Solar Distillation, Solar Water Heating, Solar Still

References

[1]	Hitesh N. Panchal et al, A comparative analysis of single slope solar still coupled with flat plate collector and passive solar still, IJRRAS 7 (2) May 2011.
[2]	Khalifa, A.J.N., A.M. Hamood Performance Correlations for Basin-type Solar Stills. Desalination 249 (2009) 24-28
[3]	Omar O. Badran, Mazen M. Abu-khader, “Evaluating thermal performance of a single slope solar still” , Heat And Mass Transfer, No.43, pp. 985-995, 2007.
[4]	Al Hayek I and Bardan O O, “The effect of using different designs of solar stills on water distillation” , Desalination, No.150, pp.230-250, 2004.
[5]	M. Koilraj Gnanadason et al, "Comparison of Performance Analysis between Single Basin Solar Still made up of Copper and GI", International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 7, July 2013.
[6]	Al-Kharabsheh S.& Goswami D. Y. Theoretical Analysis of a Water Desalination System Using Low Grade Solar Heat. Journal of Solar Energy Engineering MAY, Vol. 126, 2004.
[7]	Tiwari A.K. & Tiwari G.N. Thermal modeling based on solar fraction and experimental study of the annual and seasonal performance of a single slope passive solar still: The effect of water depths. Desalination 207,pp. 184–204, 2007.
[8]	Kalogirou S. A. Seawater desalination using renewable energy sources. Progress in Energy and Combustion Science 31,pp. 242–281,2005.
[9]	T. Rajaseenivasan, P. Nelson Raja, K. Srithar. An experimental investigation on a solar still with an integrated flat plate collector, Desalination 347 (2014) 131–137.
[10]	Mohamed A. Eltawil , Z.M. Omara. Enhancing the solar still performance using solar photovoltaic, flat plate collector and hot air, Desalination 349 (2014) 1–9.

Cite This Article

Plain Text BibTeX RIS

APA Style

Rusul Dawood Salim, Jassim Mahdi AL-Asadi, Aqeel Yousif Hashim. (2015). Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Science Journal of Energy Engineering, 3(2), 6-10. https://doi.org/10.11648/j.sjee.20150302.11

Copy | Download

ACS Style

Rusul Dawood Salim; Jassim Mahdi AL-Asadi; Aqeel Yousif Hashim. Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Sci. J. Energy Eng. 2015, 3(2), 6-10. doi: 10.11648/j.sjee.20150302.11

Copy | Download

AMA Style

Rusul Dawood Salim, Jassim Mahdi AL-Asadi, Aqeel Yousif Hashim. Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Sci J Energy Eng. 2015;3(2):6-10. doi: 10.11648/j.sjee.20150302.11

Copy | Download

@article{10.11648/j.sjee.20150302.11,
  author = {Rusul Dawood Salim and Jassim Mahdi AL-Asadi and Aqeel Yousif Hashim},
  title = {Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity},
  journal = {Science Journal of Energy Engineering},
  volume = {3},
  number = {2},
  pages = {6-10},
  doi = {10.11648/j.sjee.20150302.11},
  url = {https://doi.org/10.11648/j.sjee.20150302.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20150302.11},
  abstract = {In this research, a comparison is made among three units of solar water distillation (M1, M2 and M3) , where M1 is a passive solar still , M2 is a passive solar still coupled with flat plate collector and M3 is similar to M2 but it was provided with copper tube inside the still to realize the latent heat. Only the daily productivity factor was used to make a comparison among these units. The results shows that the productivity of M2 is more than it for M1 by 42%, While the productivity of M3 is more than it of M1 by 52%.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity
AU  - Rusul Dawood Salim
AU  - Jassim Mahdi AL-Asadi
AU  - Aqeel Yousif Hashim
Y1  - 2015/06/25
PY  - 2015
N1  - https://doi.org/10.11648/j.sjee.20150302.11
DO  - 10.11648/j.sjee.20150302.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 6
EP  - 10
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20150302.11
AB  - In this research, a comparison is made among three units of solar water distillation (M1, M2 and M3) , where M1 is a passive solar still , M2 is a passive solar still coupled with flat plate collector and M3 is similar to M2 but it was provided with copper tube inside the still to realize the latent heat. Only the daily productivity factor was used to make a comparison among these units. The results shows that the productivity of M2 is more than it for M1 by 42%, While the productivity of M3 is more than it of M1 by 52%.
VL  - 3
IS  - 2
ER  -

Copy | Download

Author Information

Rusul Dawood Salim

Physics Department, College of Education, University of Basrah, Basrah, Iraq
Jassim Mahdi AL-Asadi

Physics Department, College of Education, University of Basrah, Basrah, Iraq
Aqeel Yousif Hashim

Technical institute of Basrah, Southern Technical University, Basrah, Iraq

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Rusul Dawood Salim, Jassim Mahdi AL-Asadi, Aqeel Yousif Hashim. (2015). Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Science Journal of Energy Engineering, 3(2), 6-10. https://doi.org/10.11648/j.sjee.20150302.11

Copy | Download

ACS Style

Rusul Dawood Salim; Jassim Mahdi AL-Asadi; Aqeel Yousif Hashim. Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Sci. J. Energy Eng. 2015, 3(2), 6-10. doi: 10.11648/j.sjee.20150302.11

Copy | Download

AMA Style

Rusul Dawood Salim, Jassim Mahdi AL-Asadi, Aqeel Yousif Hashim. Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity. Sci J Energy Eng. 2015;3(2):6-10. doi: 10.11648/j.sjee.20150302.11

Copy | Download

@article{10.11648/j.sjee.20150302.11,
  author = {Rusul Dawood Salim and Jassim Mahdi AL-Asadi and Aqeel Yousif Hashim},
  title = {Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity},
  journal = {Science Journal of Energy Engineering},
  volume = {3},
  number = {2},
  pages = {6-10},
  doi = {10.11648/j.sjee.20150302.11},
  url = {https://doi.org/10.11648/j.sjee.20150302.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20150302.11},
  abstract = {In this research, a comparison is made among three units of solar water distillation (M1, M2 and M3) , where M1 is a passive solar still , M2 is a passive solar still coupled with flat plate collector and M3 is similar to M2 but it was provided with copper tube inside the still to realize the latent heat. Only the daily productivity factor was used to make a comparison among these units. The results shows that the productivity of M2 is more than it for M1 by 42%, While the productivity of M3 is more than it of M1 by 52%.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Design and Manufacture Three Solar Distillation Units and Measuring Their Productivity
AU  - Rusul Dawood Salim
AU  - Jassim Mahdi AL-Asadi
AU  - Aqeel Yousif Hashim
Y1  - 2015/06/25
PY  - 2015
N1  - https://doi.org/10.11648/j.sjee.20150302.11
DO  - 10.11648/j.sjee.20150302.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 6
EP  - 10
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20150302.11
AB  - In this research, a comparison is made among three units of solar water distillation (M1, M2 and M3) , where M1 is a passive solar still , M2 is a passive solar still coupled with flat plate collector and M3 is similar to M2 but it was provided with copper tube inside the still to realize the latent heat. Only the daily productivity factor was used to make a comparison among these units. The results shows that the productivity of M2 is more than it for M1 by 42%, While the productivity of M3 is more than it of M1 by 52%.
VL  - 3
IS  - 2
ER  -

Copy | Download