Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink

Kaoutar Bendaoud; Salahddine Krit; Mustapha Kabrane; Hassan Ouadani; Mohamed Elaskri; Khaoula Karimi; Hicham Elbousty; Lahoucine Elmaimouni

doi:doi:10.11648/j.ijssn.s.2017050501.11

Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink

Kaoutar Bendaoud, Salahddine Krit, Mustapha Kabrane, Hassan Ouadani, Mohamed Elaskri, Khaoula Karimi, Hicham Elbousty, Lahoucine Elmaimouni

Published in International Journal of Sensors and Sensor Networks (Volume 5, Issue 5-1)

Received: 21 March 2017 Accepted: 27 March 2017 Published: 15 April 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Nowadays, DC-DC converters circuits are widely used in electronics systems in order to obtain a stabilized output voltage from a given input DC Voltage. Performance of DC-DC converters is dependent on the choice of control methods. Consequently, controlling of DC-DC converter represents essential task in power conversion.The research problem addressed in this paper is to model a controlling system for Boost DC-DC converter. In this way a logic fuzzy controller is used and simulated using MATLAB/SIMULINK to increase converter efficiency and power efficiency.

Published in	International Journal of Sensors and Sensor Networks (Volume 5, Issue 5-1) This article belongs to the Special Issue Smart Cities Using a Wireless Sensor Networks
DOI	10.11648/j.ijssn.s.2017050501.11
Page(s)	1-5
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

DC/DC Boostconverter, Fuzzy Logic Controller, Matlab/Simulink, Controlled Converter

References

[1]	M. BAYATI POODEH, S. ESHTEHARDIHA, M. R. ZARE, “Application of Fuzzy Logic to Control the DC-DC Converter”, 7th WSEAS International Conference on Electric Power Systems, High Voltages, Electric Machines, Venice, Italy, November 21-23, 2007.
[2]	K. B. Khanchandani, and M. D.Singh, Power Electronics, New Delhi:Tata Mcgrawhill, 2005.
[3]	Mohammed, B. M Hasaneen, and Adel A. Elbaset. "Design and Simulation of DC-DC Boost Converter," 2008.
[4]	Tobias Geyer, GeorgiosPapafotiou and Manfred Morari, Constrained Optimal Control of the Step-Down DC–DC Converter IEEE Transactions on Power Electronics, Vol. 23, No. 5, September 2008.
[5]	Ned Mohan, W. P. Robbins and T. M. Undeland, R. Nilssen and Olive Mo: Simulation of Power Electronic and Motion Control System Proceedings of the IEEE, Vol.82, No.8, August 1994, pp. 1287–1292.
[6]	Paolo Mattavelli, L. R., Giorgio Spiazzi and Paolo Tenti, 1997. General-Purpose Fuzzy Controller for DC-DC converters IEEE Trans, 12(1): 79-86.
[7]	Eremia M., Cartina G., Petrica D., s. a. Artificial intelligence techniques in the management of power systems. EdituraAgir, Bucuresti, 2006.
[8]	Terano, T., AsaI, K., Sugeno, M.,applied fuzzy systems, Academic Presss Inc., pp.86-93, 1994.
[9]	Lee, C. C., Fuzzy Logic in Control Systems :Fuzzy logic controller Part I, IEEE Trans. On Syst. Man Cybern., vol. 20.
[10]	K. V. H. Prasad, CH. U. M. Rao, A. S. Hari, “Design and simulation of a fuzzy Logic Controller for Buck & Boost Converters”, nternational Journal of Advanced Technology & Engineering Research, May 2012,Vol. 2, Issue3, pp. 218-224.
[11]	Ganji Sai Kumar, G. Ramudu, D. Vijay Arun, “Analysis and implementation of bidirectional DC to DC Converter by using Fuzzy logic Controller”, The International Journal Of Engineering And Science (IJES),Volume 3, Issue 6, Pages 22-39, 2014.

Cite This Article

Plain Text BibTeX RIS

APA Style

Kaoutar Bendaoud, Salahddine Krit, Mustapha Kabrane, Hassan Ouadani, Mohamed Elaskri, et al. (2017). Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. International Journal of Sensors and Sensor Networks, 5(5-1), 1-5. https://doi.org/10.11648/j.ijssn.s.2017050501.11

Copy | Download

ACS Style

Kaoutar Bendaoud; Salahddine Krit; Mustapha Kabrane; Hassan Ouadani; Mohamed Elaskri, et al. Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. Int. J. Sens. Sens. Netw. 2017, 5(5-1), 1-5. doi: 10.11648/j.ijssn.s.2017050501.11

Copy | Download

AMA Style

Kaoutar Bendaoud, Salahddine Krit, Mustapha Kabrane, Hassan Ouadani, Mohamed Elaskri, et al. Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. Int J Sens Sens Netw. 2017;5(5-1):1-5. doi: 10.11648/j.ijssn.s.2017050501.11

Copy | Download

@article{10.11648/j.ijssn.s.2017050501.11,
  author = {Kaoutar Bendaoud and Salahddine Krit and Mustapha Kabrane and Hassan Ouadani and Mohamed Elaskri and Khaoula Karimi and Hicham Elbousty and Lahoucine Elmaimouni},
  title = {Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink},
  journal = {International Journal of Sensors and Sensor Networks},
  volume = {5},
  number = {5-1},
  pages = {1-5},
  doi = {10.11648/j.ijssn.s.2017050501.11},
  url = {https://doi.org/10.11648/j.ijssn.s.2017050501.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijssn.s.2017050501.11},
  abstract = {Nowadays, DC-DC converters circuits are widely used in electronics systems in order to obtain a stabilized output voltage from a given input DC Voltage. Performance of DC-DC converters is dependent on the choice of control methods. Consequently, controlling of DC-DC converter represents essential task in power conversion.The research problem addressed in this paper is to model a controlling system for Boost DC-DC converter. In this way a logic fuzzy controller is used and simulated using MATLAB/SIMULINK to increase converter efficiency and power efficiency.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink
AU  - Kaoutar Bendaoud
AU  - Salahddine Krit
AU  - Mustapha Kabrane
AU  - Hassan Ouadani
AU  - Mohamed Elaskri
AU  - Khaoula Karimi
AU  - Hicham Elbousty
AU  - Lahoucine Elmaimouni
Y1  - 2017/04/15
PY  - 2017
N1  - https://doi.org/10.11648/j.ijssn.s.2017050501.11
DO  - 10.11648/j.ijssn.s.2017050501.11
T2  - International Journal of Sensors and Sensor Networks
JF  - International Journal of Sensors and Sensor Networks
JO  - International Journal of Sensors and Sensor Networks
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2329-1788
UR  - https://doi.org/10.11648/j.ijssn.s.2017050501.11
AB  - Nowadays, DC-DC converters circuits are widely used in electronics systems in order to obtain a stabilized output voltage from a given input DC Voltage. Performance of DC-DC converters is dependent on the choice of control methods. Consequently, controlling of DC-DC converter represents essential task in power conversion.The research problem addressed in this paper is to model a controlling system for Boost DC-DC converter. In this way a logic fuzzy controller is used and simulated using MATLAB/SIMULINK to increase converter efficiency and power efficiency.
VL  - 5
IS  - 5-1
ER  -

Copy | Download

Author Information

Kaoutar Bendaoud

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Salahddine Krit

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Mustapha Kabrane

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Hassan Ouadani

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Mohamed Elaskri

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Khaoula Karimi

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Hicham Elbousty

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco
Lahoucine Elmaimouni

Laboratory of Engineering Sciences and Energies, Polydisciplinary Faculty of Ouarzazate, IbnZohr University, Agadir, Morocco

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Kaoutar Bendaoud, Salahddine Krit, Mustapha Kabrane, Hassan Ouadani, Mohamed Elaskri, et al. (2017). Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. International Journal of Sensors and Sensor Networks, 5(5-1), 1-5. https://doi.org/10.11648/j.ijssn.s.2017050501.11

Copy | Download

ACS Style

Kaoutar Bendaoud; Salahddine Krit; Mustapha Kabrane; Hassan Ouadani; Mohamed Elaskri, et al. Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. Int. J. Sens. Sens. Netw. 2017, 5(5-1), 1-5. doi: 10.11648/j.ijssn.s.2017050501.11

Copy | Download

AMA Style

Kaoutar Bendaoud, Salahddine Krit, Mustapha Kabrane, Hassan Ouadani, Mohamed Elaskri, et al. Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink. Int J Sens Sens Netw. 2017;5(5-1):1-5. doi: 10.11648/j.ijssn.s.2017050501.11

Copy | Download

@article{10.11648/j.ijssn.s.2017050501.11,
  author = {Kaoutar Bendaoud and Salahddine Krit and Mustapha Kabrane and Hassan Ouadani and Mohamed Elaskri and Khaoula Karimi and Hicham Elbousty and Lahoucine Elmaimouni},
  title = {Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink},
  journal = {International Journal of Sensors and Sensor Networks},
  volume = {5},
  number = {5-1},
  pages = {1-5},
  doi = {10.11648/j.ijssn.s.2017050501.11},
  url = {https://doi.org/10.11648/j.ijssn.s.2017050501.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijssn.s.2017050501.11},
  abstract = {Nowadays, DC-DC converters circuits are widely used in electronics systems in order to obtain a stabilized output voltage from a given input DC Voltage. Performance of DC-DC converters is dependent on the choice of control methods. Consequently, controlling of DC-DC converter represents essential task in power conversion.The research problem addressed in this paper is to model a controlling system for Boost DC-DC converter. In this way a logic fuzzy controller is used and simulated using MATLAB/SIMULINK to increase converter efficiency and power efficiency.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Implementation of Fuzzy Logic Controller (FLC) for DC-DC Boost Converter Using Matlab/Simulink
AU  - Kaoutar Bendaoud
AU  - Salahddine Krit
AU  - Mustapha Kabrane
AU  - Hassan Ouadani
AU  - Mohamed Elaskri
AU  - Khaoula Karimi
AU  - Hicham Elbousty
AU  - Lahoucine Elmaimouni
Y1  - 2017/04/15
PY  - 2017
N1  - https://doi.org/10.11648/j.ijssn.s.2017050501.11
DO  - 10.11648/j.ijssn.s.2017050501.11
T2  - International Journal of Sensors and Sensor Networks
JF  - International Journal of Sensors and Sensor Networks
JO  - International Journal of Sensors and Sensor Networks
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2329-1788
UR  - https://doi.org/10.11648/j.ijssn.s.2017050501.11
AB  - Nowadays, DC-DC converters circuits are widely used in electronics systems in order to obtain a stabilized output voltage from a given input DC Voltage. Performance of DC-DC converters is dependent on the choice of control methods. Consequently, controlling of DC-DC converter represents essential task in power conversion.The research problem addressed in this paper is to model a controlling system for Boost DC-DC converter. In this way a logic fuzzy controller is used and simulated using MATLAB/SIMULINK to increase converter efficiency and power efficiency.
VL  - 5
IS  - 5-1
ER  -

Copy | Download