Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment

Abdelkader Anouzla; Younes Abrouki; Salah Souabi; Mohammed Safi; Hayat Loukili; Hicham Rhbal; Rachid Slimani

doi:doi:10.11648/j.ijema.s.2014020601.11

| Peer-Reviewed

Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment

Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohammed Safi, Hayat Loukili, Hicham Rhbal, Rachid Slimani

Published in International Journal of Environmental Monitoring and Analysis (Volume 2, Issue 6-1)

Received: 29 August 2014 Accepted: 23 September 2014 Published: 23 September 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Central composite rotatable design experiment is used to study the effect of coagulation process for acid dye effluents and to optimise the variables such as dye concentration, coagulant dosage and initial pH, which influence the efficiency of colour and COD removal of dye effluents. The steel industrial wastewater (SIWW) FeCl3 rich is used for this study as an original coagulant to remove the acid red 14 dye solutions. A model has been obtained among decolourization, COD reduction and relevant parameters by means of variance analysis and obtained model was optimized. The efficiencies of decolourization and COD reduction for acid dye solution were accomplished at optimum conditions as 98% and 94%, respectively.

Published in	International Journal of Environmental Monitoring and Analysis (Volume 2, Issue 6-1) This article belongs to the Special Issue Environmental Science and Treatment Technology
DOI	10.11648/j.ijema.s.2014020601.11
Page(s)	1-5
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Optimization, Coagulation, SIWW, Dye Removal, Acid Red 14, Statistical Design Method

References

[1]	A. Adak, M. Bandyopadhyay, A. Pal, Fixed bed column study for the removal of crystal violet (C. I. Basic Violet 3) dye from aquatic environment by surfactant-modified alumina, Dyes Pigments 69 (2006) 245-251.
[2]	V.K. Garg, M. Amita, R. Kumar, R. Gupta, Basic dye (methylene blue) removal from simulated wastewater by adsorption using Indian Rosewood sawdust: a timber industry waste, Dyes Pigments 63 (2004) 243-250.
[3]	C.I. Pearce, J.R. Lloyd, J.T. Guthrie, The removal of colour from textile wastewater using whole bacterial cells, Dyes Pigments 58 (2003) 179-196.
[4]	C.C.I. Guarantini, M.V.B. Zanoni, Corantes Têxteis, Química Nova 23 (2000) 71-78.
[5]	E. Forgacs, T. Cseháti, G. Oros, Removal of synthetic dyes from wastewaters, Environ. Int. 30 (2004) 953-971.
[6]	A. Pala, E. Tokat, Color removal from cotton textile industry wastewater in an activated sludge system with various additives, Water Res. 36 (2002) 2920-2925.
[7]	H. Chun, W. Yizhong, Decolorization and biodegradability of photocatalytic treated azo dyes and wool textile wastewater, Chemosphere 39 (1999) 2107-2115.
[8]	T. Robinson, B. Chandran, P. Nigam, Removal of dyes from a synthetic textile dye effluent by biosorption on apple pomace and wheat straw, Water Res. 36 (2002) 2824-2830.
[9]	A. Bhatnagar, A.K. Jain, M.K. Mukul, Removal of congo red dye from water using carbon slurry waste, Environ. Chem. Lett. 2 (2005) 199-202.
[10]	R. Gong, Y. Ding, M. Li, C. Yang, H. Liu, Y. Sun, Utilization of powdered peanut hull as biosorbent for removal of anionic dyes from aqueous solution, Dyes Pigments 64 (2005) 187-192.
[11]	P. Peralta-Zamora, A. Kunz, S.G. De-Moraes, R. Pelegrini, P.D. Moleiro, J. Reyes, Degradation of reactive dyes: A comparative study of ozonation, enzymatic and photochemical processes, Chemosphere 38 (1999) 835-852.
[12]	D. Georgiou, P. Melidis, A. Aivasidis, K. Gimouho-Poulos, Degradation of azo-reactive dyes by ultraviolet radiation in the presence of hydrogen peroxide, Dyes Pigments 52 (2002) 69-78.
[13]	L.S. Tsui, W.R. Roy, M.A. Cole, Removal of dissolved textile dyes from wastewater by a compost sorbent, Coloration Technol. 119 (2003) 14-18.
[14]	G. Annadurai, R.S. Juang, D.J. Lee, Factorial design analysis for adsorption of dye on activated carbon beads incorporated with calcium alginate, Adv. Environ. Res. 6 (2002) 191-198.
[15]	V. Gokmen, A. Serpen, Equilibrium and kinetic studies on the adsorption of dark colored compounds from apple juice using adsorbent resin, J. Food Eng. 53 (2002) 221-227.
[16]	K.R. Ramakrishna, T. Viraraghavan, Use of slag for dye removal, Waste Manage. 17 (8) (1997) 483-488.
[17]	H.L. Liu, Y.R. Chiou, Optimal decolorization efficiency of Reactive Red 239 by UV/TiO2 photocatalytic process coupled with response surface methodology, Chem. Eng. J. 112 (2005) 173-179.
[18]	J. Wu, M.A. Eiteman, S.E. Law, Evaluation of membrane filtration and ozonation processes for treatment of reactive dye wastewater, J. Environ. Eng. 124 (1998) 272-277.
[19]	D. Mohan, K.P. Singh, G. Singh, K. Kumar, Removal of dyes from wastewater using flyash, a low-cost adsorbent, Ind. Eng. Chem. Res. 41 (15) (2002) 3688-3895.
[20]	I. Arslan, I.A. Balcioglu, D.W. Bahnemann, Advanced chemical oxidation of reactive dyes in simulated dyehouse effluents by ferrioxalate-Fenton/UVA and TiO2/UV-A processes, Dyes Pigments 47 (2000) 207-218.
[21]	V. Golob, A. Vinder, M. Simonic, Efficiency of the coagulation/flocculation method for the treatment of dye bath effluents, Dyes Pigments 67 (2005) 93-7.
[22]	M.A. Aboulhassan, S. Souabi, A. Yaacoubi, Pollution reduction and biodegradability index improvement of tannery effluents, Int. J. Environ. Sci. Technol. 5 (1) (2008) 11-16.
[23]	M.A. Aboulhassan, S. Souabi, A. Yaacoubi, M. Baudu, Treatment of textile wastewater using a natural flocculant, Environ. Techno. 26 (2005) 705-711.
[24]	R.H. Myers, D.C. Montgomery, Response surface methodology: process and product optimization using designed experiments, John Wiley & Sons, New York, 1995.
[25]	Abdelkader Anouzla, Salah Souabi, Mohamed Safi, Younes Abrouki, Hayat Loukili, Hicham Rhbal. Waste to Treat Waste of Landfill Leachates. International Journal of Environmental Protection and Policy (IJEPP) Volume 2, Issue 2, 2014, Pages 50-53.
[26]	Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohamed Safi, Hicham Rhbal. Chapitre 12 « Optimization and Modeling of Decolorization and COD Reduction of Reactive Dye Solutions by Coagulation Processes with SIWW’s Coagulant » The Role of Colloidal Systems on Environmental Protection 2014 Pages 279–288.
[27]	APHA, AWWA, WPCF, Standard methods for the examination of water and wastewater, DC, Washington, 1998.
[28]	G.M. Clarke, R.E. Kempson, Introduction to the Design and Analysis of Experiments, Arnold, London, 1997.
[29]	E. Şayan, Optimization and modeling of decolorization and COD reduction of reactive dye solutions by ultrasound-assisted adsorption, Chem. Eng. J. 119 (2006) 175-181.

Cite This Article

Plain Text BibTeX RIS

APA Style

Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohammed Safi, Hayat Loukili, et al. (2014). Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. International Journal of Environmental Monitoring and Analysis, 2(6-1), 1-5. https://doi.org/10.11648/j.ijema.s.2014020601.11

Copy | Download

ACS Style

Abdelkader Anouzla; Younes Abrouki; Salah Souabi; Mohammed Safi; Hayat Loukili, et al. Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. Int. J. Environ. Monit. Anal. 2014, 2(6-1), 1-5. doi: 10.11648/j.ijema.s.2014020601.11

Copy | Download

AMA Style

Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohammed Safi, Hayat Loukili, et al. Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. Int J Environ Monit Anal. 2014;2(6-1):1-5. doi: 10.11648/j.ijema.s.2014020601.11

Copy | Download

@article{10.11648/j.ijema.s.2014020601.11,
  author = {Abdelkader Anouzla and Younes Abrouki and Salah Souabi and Mohammed Safi and Hayat Loukili and Hicham Rhbal and Rachid Slimani},
  title = {Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment},
  journal = {International Journal of Environmental Monitoring and Analysis},
  volume = {2},
  number = {6-1},
  pages = {1-5},
  doi = {10.11648/j.ijema.s.2014020601.11},
  url = {https://doi.org/10.11648/j.ijema.s.2014020601.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.s.2014020601.11},
  abstract = {Central composite rotatable design experiment is used to study the effect of coagulation process for acid dye effluents and to optimise the variables such as dye concentration, coagulant dosage and initial pH, which influence the efficiency of colour and COD removal of dye effluents. The steel industrial wastewater (SIWW) FeCl3 rich is used for this study as an original coagulant to remove the acid red 14 dye solutions. A model has been obtained among decolourization, COD reduction and relevant parameters by means of variance analysis and obtained model was optimized. The efficiencies of decolourization and COD reduction for acid dye solution were accomplished at optimum conditions as 98% and 94%, respectively.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment
AU  - Abdelkader Anouzla
AU  - Younes Abrouki
AU  - Salah Souabi
AU  - Mohammed Safi
AU  - Hayat Loukili
AU  - Hicham Rhbal
AU  - Rachid Slimani
Y1  - 2014/09/23
PY  - 2014
N1  - https://doi.org/10.11648/j.ijema.s.2014020601.11
DO  - 10.11648/j.ijema.s.2014020601.11
T2  - International Journal of Environmental Monitoring and Analysis
JF  - International Journal of Environmental Monitoring and Analysis
JO  - International Journal of Environmental Monitoring and Analysis
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2328-7667
UR  - https://doi.org/10.11648/j.ijema.s.2014020601.11
AB  - Central composite rotatable design experiment is used to study the effect of coagulation process for acid dye effluents and to optimise the variables such as dye concentration, coagulant dosage and initial pH, which influence the efficiency of colour and COD removal of dye effluents. The steel industrial wastewater (SIWW) FeCl3 rich is used for this study as an original coagulant to remove the acid red 14 dye solutions. A model has been obtained among decolourization, COD reduction and relevant parameters by means of variance analysis and obtained model was optimized. The efficiencies of decolourization and COD reduction for acid dye solution were accomplished at optimum conditions as 98% and 94%, respectively.
VL  - 2
IS  - 6-1
ER  -

Copy | Download

Author Information

Abdelkader Anouzla

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Younes Abrouki

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Salah Souabi

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Mohammed Safi

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Hayat Loukili

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Hicham Rhbal

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc
Rachid Slimani

Laboratoire de Génie de l’Eau et de l’Environnement, Université Hassan II, Faculté des Sciences et Techniques de Mohammedia, Mohammedia, Maroc

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohammed Safi, Hayat Loukili, et al. (2014). Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. International Journal of Environmental Monitoring and Analysis, 2(6-1), 1-5. https://doi.org/10.11648/j.ijema.s.2014020601.11

Copy | Download

ACS Style

Abdelkader Anouzla; Younes Abrouki; Salah Souabi; Mohammed Safi; Hayat Loukili, et al. Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. Int. J. Environ. Monit. Anal. 2014, 2(6-1), 1-5. doi: 10.11648/j.ijema.s.2014020601.11

Copy | Download

AMA Style

Abdelkader Anouzla, Younes Abrouki, Salah Souabi, Mohammed Safi, Hayat Loukili, et al. Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment. Int J Environ Monit Anal. 2014;2(6-1):1-5. doi: 10.11648/j.ijema.s.2014020601.11

Copy | Download

@article{10.11648/j.ijema.s.2014020601.11,
  author = {Abdelkader Anouzla and Younes Abrouki and Salah Souabi and Mohammed Safi and Hayat Loukili and Hicham Rhbal and Rachid Slimani},
  title = {Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment},
  journal = {International Journal of Environmental Monitoring and Analysis},
  volume = {2},
  number = {6-1},
  pages = {1-5},
  doi = {10.11648/j.ijema.s.2014020601.11},
  url = {https://doi.org/10.11648/j.ijema.s.2014020601.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.s.2014020601.11},
  abstract = {Central composite rotatable design experiment is used to study the effect of coagulation process for acid dye effluents and to optimise the variables such as dye concentration, coagulant dosage and initial pH, which influence the efficiency of colour and COD removal of dye effluents. The steel industrial wastewater (SIWW) FeCl3 rich is used for this study as an original coagulant to remove the acid red 14 dye solutions. A model has been obtained among decolourization, COD reduction and relevant parameters by means of variance analysis and obtained model was optimized. The efficiencies of decolourization and COD reduction for acid dye solution were accomplished at optimum conditions as 98% and 94%, respectively.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Optimisation of Coagulation Process with SIWW is Coagulant for Colour and COD Removal of Acid Dye Effluent Using Central Composite Design Experiment
AU  - Abdelkader Anouzla
AU  - Younes Abrouki
AU  - Salah Souabi
AU  - Mohammed Safi
AU  - Hayat Loukili
AU  - Hicham Rhbal
AU  - Rachid Slimani
Y1  - 2014/09/23
PY  - 2014
N1  - https://doi.org/10.11648/j.ijema.s.2014020601.11
DO  - 10.11648/j.ijema.s.2014020601.11
T2  - International Journal of Environmental Monitoring and Analysis
JF  - International Journal of Environmental Monitoring and Analysis
JO  - International Journal of Environmental Monitoring and Analysis
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2328-7667
UR  - https://doi.org/10.11648/j.ijema.s.2014020601.11
AB  - Central composite rotatable design experiment is used to study the effect of coagulation process for acid dye effluents and to optimise the variables such as dye concentration, coagulant dosage and initial pH, which influence the efficiency of colour and COD removal of dye effluents. The steel industrial wastewater (SIWW) FeCl3 rich is used for this study as an original coagulant to remove the acid red 14 dye solutions. A model has been obtained among decolourization, COD reduction and relevant parameters by means of variance analysis and obtained model was optimized. The efficiencies of decolourization and COD reduction for acid dye solution were accomplished at optimum conditions as 98% and 94%, respectively.
VL  - 2
IS  - 6-1
ER  -

Copy | Download