Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K

Sujit Kumar Shah; Ajaya Bhattarai; Sujeet Kumar Chatterjee

doi:doi:10.11648/j.ajche.20140206.12

| Peer-Reviewed

Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K

Sujit Kumar Shah, Ajaya Bhattarai, Sujeet Kumar Chatterjee

Published in American Journal of Chemical Engineering (Volume 2, Issue 6)

Received: 14 October 2014 Accepted: 27 October 2014 Published: 30 October 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The densities of dodecyltrimethylammonium bromide in pure water and in methanol + water mixed solvent media containing (0.10, 0.20, 0.30, and 0.40) volume fractions of methanol were measured at (298.15, 308.15, 318.15, and 323.15) K. The concentrations are varied from (0.4 10-1 to 1.2 10-1) mol kg-1. The results showed almost increase on the densities with increasing surfactant concentration. Also, the densities are found to decrease with increasing temperature over the entire concentration range investigated in a given mixed solvent medium and these values are found to decrease with increasing methanol content in the solvent composition. The effects of concentration, solvent composition and temperature on the partial molar volumes are discussed.

Published in	American Journal of Chemical Engineering (Volume 2, Issue 6)
DOI	10.11648/j.ajche.20140206.12
Page(s)	76-85
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

DTAB, Solvent Composition, Methanol-Water Mixed Solvent Media

References

[1]	M. L. Moya, A. Rodriguez, M. M. Graciani, G. Fernandez, Role of the solvophobic effect on micellization. Journal of Colloid and Interface Science, 2007. Vol. 316 (2), pp. 787 - 795.
[2]	H. N. Singh, S. Swarup, S.M. Saleem, Effect of electrolytes on the micellization of ionic Surfactants in n-alkanol—water mixtures. Colloid and Interface Science, 1979. Vol. 68(1), pp. 128 - 134.
[3]	W. Li, Y. C. Han, J. L. Zhang, L. X. Wang, J. Song, Thermodynamic modeling of CTAB aggregation in water-ethanol mixed solvents.Colloid Journal, 2006. Vol. 68. pp. 304 - 310.
[4]	K. Manna, A. K. Panda, Physicochemical Studies on the Interfacial and Micellization Behavior of CTAB in Aqueous Polyethylene Glycol Media. Journal of surfactants and detergents 2011. Vol. 14(4), pp. 563 - 576.
[5]	A. Bhattarai, S.K. Chatterjee, T.K. Deo, T.P. Niraula, Effects of Concentration, Temperature, and Solvent Composition on the Partial Molar Volumes of Sodium Lauryl Sulfate in Methanol (1) + Water (2) Mixed Solvent Media. Journal of Chemical Engineering Data, 2011. Vol.56(8), pp. 3400 - 3405.
[6]	H. Durchschlag, P. Zipper, Calculation of the partial volume of organic compounds and polymers Progress in Colloid Polymer Science. 1994. Vol. 94 (1), pp. 20-39.
[7]	P. Gianni, L. Lepori, Group contributions to the partial molar volume of ionic organic solutes in aqueous solution. Journal of Solution Chemistry. 1996. Vol. 25(1), pp. 1 - 42.
[8]	H. Eisenberg, In Biological Macromolecules and polyelectrolytes in Solution; Clarendron, Oxford 1976.
[9]	H. Durchschlag, In Thermodynamic Data for Biochemistry and Biotechnology (ed. Hinz, H.-J.) Springer, Berlin. pp. 45, 1986.
[10]	C. Wandrey, A. Bartkowiak, D. Hunkeler, Partial Molar and Specific Volumes of Polyelectrolytes: Comparison of Experimental and Predicted Values in Salt-free Solutions. Langmuir, 1999. Vol. 15(12), pp. 4062-4068.
[11]	C. Tondre, R. Zana, Apparent molal volumes of polyelectrolytes in aqueous solution. Journal of Physical Chemistry, 1972. Vol. 76(23), pp. 3451 - 3459.
[12]	H. Doe, T. Kitagawa, K, Sasabe, Conductometric study of some metal(II) perchlorates in methanol. Journal of Physical Chemistry, 1984. Vol. 88(15), pp. 3341 - 3345.
[13]	A. Bhattarai, P. Nandi, B. Das, The Effects of Concentration, Relative Permittivity and Temperature on the Transport Properties of Sodium Polystyrenesulphonate in Methanol–Water Mixed Solvent Media. Journal of Polymer Research, 2006, Vol. 13(1), pp. 475 - 482.
[14]	A. Chatterjee, B. Das, Electrical Conductances of Tetrabutylammonium Bromide, Sodium Tetraphenylborate, and Sodium Bromide in Methanol (1) + Water (2) Mixtures at (298.15, 308.15, and 318.15) K. Journal of Chemical Engineeering Data, 2006, Vol. 51(4), pp. 1352 - 1355.
[15]	G. S. Kell, Precise representation of volume properties of water at one atmosphere. Journal of Chemical Engineering Data, 1967, Vol. 12(1), pp. 66 - 69.
[16]	R. De Lisi, S. Milioto, R. E. Verrall, Volumes and compressibilities of pentanol in aqueous alkyltrimethylammonium bromide solutions at different temperatures. Journal of Solution Chemistry, 1990, Vol. 19(7), pp. 639 - 664.
[17]	P. S. Albright, L. J. Gasting, Dielectric Constants of the Methanol-Water System from 5 to 55°. Journal of American Chemical Society, 1946, Vol. 68(6), pp. 1061-1063.
[18]	A. Domard, M. Rinaudo, Preparation and characterization of fully deacetylated chitosan, International Journal of Biology Macromolecule, 1983, Vol. 5(1), pp. 49 - 52.
[19]	F. Franks, J. Desnoyers, In Water Science Reviews 1; Franks, F., Ed.; Cambridge University Press: London,1985.
[20]	S. K. Thakur, S. Chauhan, Ultrasonic Velocity and allied parameters of drug Colimax in aqueous 1-propanol at 298.15K. Journal of Chemistry Pharmaceutical Research, 2011. Vol. 3(2), pp. 657 - 664.
[21]	V. K. Syal, S. K. Thakur, S. Chauhan, P. Sharma, Ultrasonic Velocity Studies of Drug Parvon-spas in Mixed Alcohol–Water Solvent Systems at 25°C. International Journal of Thermophysics, 2005. Vol. 26(3), pp. 807 - 826.
[22]	S. Chauhan, M.S. Chauhan, D. Kaushal, V.K. Syal, J. Jyoti, Study of Micellar Behavior of SDS and CTAB in Aqueous Media Containing Furosemide—A Cardiovascular Drug. Journal of Solution Chemistry, 2010. Vol. 39(5), pp. 622 - 638.
[23]	M.F. Hossain, T.K. Biswas, M.N. Islam, M. E. Huque, Volumetric and viscometric studies on dodecyltrimethylammonium bromide in aqueous and in aqueous amino acid solutions in premicellar region. Monatshefte für Chemie, 2010. Vol. 141(12), pp. 1297-1308.
[24]	M. J. Iqbal, M. Siddiquah, Partial Molar Volume of Mefenamic Acid in Alcohol at Temperatures between T=293.15 and T=313.15 K. Journal of Brazil Chemical Society, 2006. Vol. 17(5), pp. 851 - 858.
[25]	A. Bhattarai, B. Das, Solvodynamic Properties of Sodium Polystyrenesulfo-nate in Methanol-Water Mixed Solvent Media in Absence and in the Presence of a Salt Using Viscometric Method, Macromolecular Symposia, 2012. Vol. 315(1), pp. 52 - 59.
[26]	A. Chatterjee, B. Das, C. Das, Polyion–counterion interaction behavior for sodium carboxymethylcellulose in methanol–water mixed solvent media, Carbohydrate Polymer, 2012. Vol. 87(2), pp. 1144-1152.

Cite This Article

Plain Text BibTeX RIS

APA Style

Sujit Kumar Shah, Ajaya Bhattarai, Sujeet Kumar Chatterjee. (2014). Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. American Journal of Chemical Engineering, 2(6), 76-85. https://doi.org/10.11648/j.ajche.20140206.12

Copy | Download

ACS Style

Sujit Kumar Shah; Ajaya Bhattarai; Sujeet Kumar Chatterjee. Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. Am. J. Chem. Eng. 2014, 2(6), 76-85. doi: 10.11648/j.ajche.20140206.12

Copy | Download

AMA Style

Sujit Kumar Shah, Ajaya Bhattarai, Sujeet Kumar Chatterjee. Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. Am J Chem Eng. 2014;2(6):76-85. doi: 10.11648/j.ajche.20140206.12

Copy | Download

@article{10.11648/j.ajche.20140206.12,
  author = {Sujit Kumar Shah and Ajaya Bhattarai and Sujeet Kumar Chatterjee},
  title = {Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K},
  journal = {American Journal of Chemical Engineering},
  volume = {2},
  number = {6},
  pages = {76-85},
  doi = {10.11648/j.ajche.20140206.12},
  url = {https://doi.org/10.11648/j.ajche.20140206.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20140206.12},
  abstract = {The densities of dodecyltrimethylammonium bromide in pure water and in methanol + water mixed solvent media containing (0.10, 0.20, 0.30, and 0.40) volume fractions of methanol were measured at (298.15, 308.15, 318.15, and 323.15) K. The concentrations are varied from (0.4 10-1 to 1.2 10-1) mol kg-1. The results showed almost increase on the densities with increasing surfactant concentration. Also, the densities are found to decrease with increasing temperature over the entire concentration range investigated in a given mixed solvent medium and these values are found to decrease with increasing methanol content in the solvent composition. The effects of concentration, solvent composition and temperature on the partial molar volumes are discussed.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K
AU  - Sujit Kumar Shah
AU  - Ajaya Bhattarai
AU  - Sujeet Kumar Chatterjee
Y1  - 2014/10/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ajche.20140206.12
DO  - 10.11648/j.ajche.20140206.12
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 76
EP  - 85
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20140206.12
AB  - The densities of dodecyltrimethylammonium bromide in pure water and in methanol + water mixed solvent media containing (0.10, 0.20, 0.30, and 0.40) volume fractions of methanol were measured at (298.15, 308.15, 318.15, and 323.15) K. The concentrations are varied from (0.4 10-1 to 1.2 10-1) mol kg-1. The results showed almost increase on the densities with increasing surfactant concentration. Also, the densities are found to decrease with increasing temperature over the entire concentration range investigated in a given mixed solvent medium and these values are found to decrease with increasing methanol content in the solvent composition. The effects of concentration, solvent composition and temperature on the partial molar volumes are discussed.
VL  - 2
IS  - 6
ER  -

Copy | Download

Author Information

Sujit Kumar Shah

Department of Chemistry, M. M. A. M. C, Tribhuvan University, Biratnagar, Nepal
Ajaya Bhattarai

Department of Chemistry, M. M. A. M. C, Tribhuvan University, Biratnagar, Nepal
Sujeet Kumar Chatterjee

Department of Chemistry, M. M. A. M. C, Tribhuvan University, Biratnagar, Nepal

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Sujit Kumar Shah, Ajaya Bhattarai, Sujeet Kumar Chatterjee. (2014). Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. American Journal of Chemical Engineering, 2(6), 76-85. https://doi.org/10.11648/j.ajche.20140206.12

Copy | Download

ACS Style

Sujit Kumar Shah; Ajaya Bhattarai; Sujeet Kumar Chatterjee. Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. Am. J. Chem. Eng. 2014, 2(6), 76-85. doi: 10.11648/j.ajche.20140206.12

Copy | Download

AMA Style

Sujit Kumar Shah, Ajaya Bhattarai, Sujeet Kumar Chatterjee. Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K. Am J Chem Eng. 2014;2(6):76-85. doi: 10.11648/j.ajche.20140206.12

Copy | Download

@article{10.11648/j.ajche.20140206.12,
  author = {Sujit Kumar Shah and Ajaya Bhattarai and Sujeet Kumar Chatterjee},
  title = {Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K},
  journal = {American Journal of Chemical Engineering},
  volume = {2},
  number = {6},
  pages = {76-85},
  doi = {10.11648/j.ajche.20140206.12},
  url = {https://doi.org/10.11648/j.ajche.20140206.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20140206.12},
  abstract = {The densities of dodecyltrimethylammonium bromide in pure water and in methanol + water mixed solvent media containing (0.10, 0.20, 0.30, and 0.40) volume fractions of methanol were measured at (298.15, 308.15, 318.15, and 323.15) K. The concentrations are varied from (0.4 10-1 to 1.2 10-1) mol kg-1. The results showed almost increase on the densities with increasing surfactant concentration. Also, the densities are found to decrease with increasing temperature over the entire concentration range investigated in a given mixed solvent medium and these values are found to decrease with increasing methanol content in the solvent composition. The effects of concentration, solvent composition and temperature on the partial molar volumes are discussed.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Densities and Partial Molar Volumes of Dodecyltrimethylammonium Bromide in Binary Systems (Methanol+Water) at T=(298.15 to 323.15) K
AU  - Sujit Kumar Shah
AU  - Ajaya Bhattarai
AU  - Sujeet Kumar Chatterjee
Y1  - 2014/10/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ajche.20140206.12
DO  - 10.11648/j.ajche.20140206.12
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 76
EP  - 85
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20140206.12
AB  - The densities of dodecyltrimethylammonium bromide in pure water and in methanol + water mixed solvent media containing (0.10, 0.20, 0.30, and 0.40) volume fractions of methanol were measured at (298.15, 308.15, 318.15, and 323.15) K. The concentrations are varied from (0.4 10-1 to 1.2 10-1) mol kg-1. The results showed almost increase on the densities with increasing surfactant concentration. Also, the densities are found to decrease with increasing temperature over the entire concentration range investigated in a given mixed solvent medium and these values are found to decrease with increasing methanol content in the solvent composition. The effects of concentration, solvent composition and temperature on the partial molar volumes are discussed.
VL  - 2
IS  - 6
ER  -

Copy | Download